Head Hunter Diver
You are looking at the most compact underwater metal detector in the world. Not only does this metal detector contain today's most innovative electronics, it is the first detector that has all the electronics built into the headphones. By eliminating a control housing, weight of the detector is significantly reduced and so is your arm fatigue. When you travel, the Headhunter also takes up very little luggage space. All of this is possible because of our innovative microcircuitry and packaging. The Headhunter has been engineered to perform in both salt and fresh water, but it is also just as effective on land as well. The headhunter is a true universal application metal detector and will open up a whole new world of excitement for you. Tens of thousands of valuables are continuously lost each year and now you can start finding them!
Technical Specifications:
Operating Search Frequency: 2.4kHz quartz crystal controlled.
Searchcoil: solid 8 inch MegaDEPTH heavy-duty negative buoyancy coil, co-planar, RF shielded.
Headphone Transducers: Permanently encapsulated high-output piezoelectric.
Audio Frequency: 400 Hz.
Headphone Earcups: Heavy-duty polymer full ear surround; extra comfortable stay-soft non-hardening cushions, ambient noise blocking up to 24 decibels.
Headphone Frame: Adjustable padded headband, no screws, no wire frame, no rust, compact carry foldable design.
Controls: Full range volume, "stay put" discrimination and sensitivity with segmented "click" positioning.
Search Mode: Silent search, slow motion full range discrimination.
Operating environments: Salt & fresh water to 100 feet, beach, rain storms, land.
Cable: Heavy-duty custom assembly with anti-abrasion armor & coiled section.
Hand Grip: Soft foam anatomic for all-day use.
Rods: Self-draining anodized aluminum with durable baked on powder coating.
Armrest: Adjustable stainless steel with waterproof padding and Velcro strap
Isolator: Heavy-duty non-metallic with nylon thumbnut & stud assembly.
Rod Length: 27 to 53 inches.
Breakdown: Three pieces for easy storage and travel.
Weight With Batteries: 3.5 pounds.
Batteries: (2) 9-Volt cells of any type, carbon-zinc (supplied), alkaline, or rechargeable.
Battery Life: Up to 50 hours (alkaline)
Applications: Jewelry, relic, and coin hunting.
Warranty: Two Years.
NOTE: Specifications and features subject to change without notice. |

Head Hunter Wader
You are looking at the most compact amphibious metal detector in the world. Not only does this metal detector contain today's most innovative electronics, it is the first detector that has all the electronics built into the headphones. By eliminating a control housing, weight of the detector is significantly reduced and so is your arm fatigue. When you travel, the Headhunter also takes up very little luggage space. All of this is possible because of our innovative microcircuitry and packaging. The Headhunter has been engineered to perform in both salt and fresh water, but it is also just as effective on land as well. The headhunter is a true universal application metal detector and will open up a whole new world of excitement for you. Tens of thousands of valuables are continuously lost each year and now you can start finding them!
Technical Specifications
Operating Search Frequency: 2.4kHz quartz crystal controlled.
Searchcoil: solid 8 inch MegaDEPTH heavy-duty negative buoyancy coil, co-planar, RF shielded.
Headphone Transducers: Permanently encapsulated high-output piezoelectric.
Audio Frequency: 400 Hz.
Headphone Earcups: Heavy-duty polymer full ear surround; extra comfortable stay-soft non-hardening cushions, ambient noise blocking up to 24 decibels.
Headphone Frame: Adjustable padded headband, no screws, no wire frame, no rust, compact carry foldable design.
Controls: Full range volume, "stay put" discrimination and sensitivity with segmented "click" positioning.
Search Mode: Silent search, slow motion full range discrimination.
Operating environments: Salt & fresh water to 6 feet, beach, rain storms, land.
Cable: Heavy-duty custom assembly with anti-abrasion armor & coiled section.
Hand Grip: Soft foam anatomic for all-day use.
Rods: Self-draining anodized aluminum with durable baked on powder coating.
Armrest: Adjustable stainless steel with waterproof padding and Velcro strap
Isolator: Heavy-duty non-metallic with nylon thumbnut & stud assembly.
Rod Length: 43 to 53 inches.
Breakdown: Three pieces for easy storage and travel.
Weight With Batteries: 3.5 pounds.
Batteries: (2) 9-Volt cells of any type, carbon-zinc (supplied), alkaline, or rechargeable.
Battery Life: Up to 50 hours (alkaline)
Applications: Jewelry, relic, and coin hunting.
Warranty: Two Years
NOTE: Specifications and features subject to change without notice |

Head Hunter Pulse
Our Headhunter PULSE was designed to do one thing very well... Punch deep in high mineral sand and salt conditions for GOLD! Newly engineered PULSE circuitry now fits into our acclaimed headphones making it the most compact underwater PI metal detector in the world today. The Headhunter PULSE has been engineered to perform in both salt and fresh water. The Headhunter PULSE circuitry is controlled by a unique new Frequency control that re-tunes the sensitivity of the HEADHUNTER PULSE to be responsive to selected metals without losing its depth toward the selected metal. Unlike other PI detectors, turning the frequency control back from the higher frequency position will not result in a loss of depth for the detector.
Technical Specifications:
Operating Search Frequency: Adjustable
Searchcoil: 11 inch round open-center
Headphone Transducers: Permanently encapsulated high-output piezoelectric.
Audio Frequency: Adjustable
Headphone Earcups: Heavy-duty polymer full ear surround; extra comfortable stay-soft non-hardening cushions, ambient noise blocking up to 24 decibels.
Headphone Frame: Adjustable padded headband, no screws, no wire frame, no rust, compact carry foldable design.
Controls: Full range Volume, Frequency Adjust, & Tuning
Search Mode: Slow motion all-metal
Operating environments: Salt & fresh water to 100 feet, beach, & rain storms.
Cable: Heavy-duty custom straight
Hand Grip: Soft foam anatomic for all-day use.
Rods: Self-draining anodized aluminum with durable baked on powder coating.
Armrest: Adjustable stainless steel with waterproof padding and Velcro strap
Isolator: Heavy-duty non-metallic with nylon thumbnut & stud assembly.
Rod Length: 27 to 53 inches.
Breakdown: Three pieces for easy storage and travel.
Weight With Batteries: 3.5 pounds.
Batteries: (2) 9-Volt cells of any type, carbon-zinc (supplied), alkaline, or rechargeable.
Battery Life: 8-12 hours (alkaline)
Applications: Jewelry, relic, and coin hunting.
Warranty: Two Years
NOTE: Specifications and features subject to change without notice. |
Land Hunter Pro
We took the best
features of our water-based machines and created a lightweight land
detector called the Headhunter LANDPRO. We raised the bar in
land detecting by adding a built-in target probe with a highly
accessible detachable mount directly on the searchcoil shaft!
With a flip of switch, you have full detection power directed into
the probe during target recovery. Your chances of scratching a
valuable find are greatly reduced by being able to pinpoint your
target very accurately. Checkout the valuable coins at the bottom of
this page found during our prototype testing!
Check out the new
features on this brand new model!
Technical
Specifications:
- Operating
Search Frequency:
2.4kHz quartz
crystal controlled.
- Searchcoils:
10-inch
MegaDEPTH heavy-duty,
optional 8"
searchcoil with UW connector.
- Target Probe:
Built-in
full detection power probe for more accurate pinpointing and
recovery; mounts on the control shaft for better accessibility.

- Headphone
Transducers:
Permanently
encapsulated high-output piezoelectric.
- Audio
Frequency:
400 Hz.
- Headphone
Earcups:
Heavy-duty polymer full ear surround; extra comfortable soft
cushions, ambient noise blocking up to 24 decibels,
heavy-duty
ear-to-ear wiring with heavy-duty ear-to-ear wiring for added
strength;
special connectors for interchangeable searchcoils and target
probe.
- Headphone
Frame:
Adjustable padded headband, no screws, no wire frame, no rust,
compact carry foldable design.
- Controls:
"Stay
put" discrimination with segmented "click" positioning;
full-range volume
and sensitivity for fine adjustments.
- Search Mode:
Silent
search, slow motion full range discrimination.
- Operating
environments:
Land and beach.
- Cable:
Straight,
heavy-duty coil wire for added strength; coiled/straight wire on
probe.
- Hand Grip:
Soft foam
anatomic for all-day use.
- Rods:
Self-draining
anodized aluminum with durable
baked on black
powder coating.
- Armrest:
Adjustable stainless steel with waterproof padding.
- Isolator:
Heavy-duty non-metallic with
nylon wingnuts &
stud assembly.
- Rod Length:
43 to 53
inches.
- Breakdown:
Three
pieces for easy storage and travel.
- Weight With
Batteries:
3.5 pounds.
- Batteries:
(2)
9-Volt cells of any type, carbon-zinc, alkaline or rechargeable
can be used.
- Battery Life:
Up to 50
hours (alkaline)
- Applications:
Jewelry,
relic, and coin hunting.
- Warranty:
Two
Years.
- NOTE:
Specifications and features subject to change without notice.
|